The difference between rotary cutting machine with and without card

The traditional veneer veneer rotary cutter has a clamping core, which can not be cut after it is smaller than a certain diameter. Moreover, when the diameter of the log is small, there are only two claws to support the log, and the rigidity in the middle is weak, which often leads to the phenomenon of giving way to the cutter and jumping the knife. The thickness error of the rolled wood is very large, and the value is low. It is a waste of a lot of logs and the utilization rate is very low. In order to improve the utilization rate of wood, a card free rotary cutting machine was invented.

The card free rotary cutter can not only cut the remaining wood core of the rotary cutting machine into veneers, but also cut the small diameter wood into veneers, which improves the utilization rate of wood. The system is more flexible and the degree of automation is further improved. It can accurately control the moving speed of the rotary cutter to control the thickness of the rotary cutting plate. The system is easy to operate, and the veneer flow is smooth and the peeling accuracy is high.